How to PROPERLY Repair a Rust Hole in your Car or Truck (DIY for Beginners)
ChrisFix on YouTube
A video on YouTube. In Cars, a Krater category.
Watch on YouTubeSummary by Krater
A complete step-by-step tutorial on how to permanently repair a rusted-out floorboard in a car. The video covers finding the source of the leak, cutting out rusted metal, fabricating and fitting a new patch panel, butt-welding it in place with a MIG welder, and sealing and painting the metal to prevent future rust.
From the video
Answers: How do you permanently repair a rusted car floorboard?
- Rust repair in car floorboards
- Finding and fixing automotive water leaks
- Using a sheet metal nibbler
- MIG welding thin sheet metal
- Butt welding vs lap welding floor pans
- Using a copper heat sink for welding burn-throughs
- Rust prevention and sealing
What it concludes
- Removing all rust down to shiny bare metal and applying a rust barrier paint is necessary to prevent future rust.
- Using a full-face respirator with P100 filters is recommended over a basic N95 dust mask when grinding rust and undercoating.
- A 90 amp flux-core welder with 0.030-inch wire cannot weld metal thinner than 22 gauge without burning through, making a gas MIG welder necessary for thin automotive sheet metal.
- Butt welding is superior to lap welding for floorboards because it creates a seamless joint with no gap for moisture and future rust, although it requires precise fitting.
- Prep-cleaning metal surfaces by sanding off all paint, rust, undercoating, and seam sealer with a wire wheel is critical to prevent weld contamination and cracking.
- Using a piece of copper pipe or flat copper as a heat sink underneath holes during welding absorbs excess heat and allows easy filling of burn-throughs.
Seen it? Rate it, review it and add it to your lists.
Title, thumbnail and channel name from YouTube. Krater isn't affiliated with, endorsed by or sponsored by YouTube or Google.